DuPont Advanced Printing (DuPont) has announced it will launch DuPont Cyrel EASY BRITE Screens and the Cyrel EASY BRITE Index during FTA Forum/INFOFLEX 2018 May 6 – 9 in Indianapolis, Indiana. The screens are designed to optimize ink laydown in high-volume printing, typically seen when printing a white undercoat, or solid areas with spot colours. They contain a suite of screens that have shown to improve solid printing at volumes of 4.0 bcm and greater. There are five screens in total: two screens designed for customers without the HD Pixel+ imaging capability and three screens designed to take full advantage of HD Pixel+ imaging.
“We are excited to launch our new Cyrel EASY BRITE Screens. A brighter white is not just about opacity – we believe high opacity alone doesn’t make a good print. You need a combination of opacity, low mottle and low graininess to have a good white. Cyrel EASY BRITE Screens will deliver not only high opacity but also improved mottle and improved graininess on inks that use a high volume anilox. The EASY BRITE Index is a multidimensional measurement that combines opacity, mottle and graininess into a single number,” said Shyamal Desai, marketing manager, Americas, DuPont Advanced Printing.
The combination of Cyrel EASY Plates and the EASY BRITE Screens deliver:
- Better overall consistency and more consistent print of large solid areas
- Higher print quality
- Uniform ink layer
- Elimination of trail edge void
- Improved appearance of final print
- Improved opacity, reduced graininess and reduced mottle
- Flexibility, as they allow printers to go to higher quality levels using their existing setup
Shyamal will share more about DuPont Cyrel EASY BRITE Screens and the EASY BRITE Index during InfoFlex Solutions Theatre, Monday, May 7, from 3:25 to 3:45 p.m. ET.
